Should I use ceramic tile or vinyl/plastic tub enclosure system? - plastic enclosure for power supply
Who is "better" with ceramic tiles to cover an area of the bath or go with a plastic or vinyl?
I just bought a house and the bathroom had a few problems. The mortar is cracking and it seems that nothing can be a few pictures of the entire faucet support. I am glad to know what is best described in terms of function and also a view on the value of the house.
Thank you,
-Rob --
Plastic Enclosure For Power Supply Should I Use Ceramic Tile Or Vinyl/plastic Tub Enclosure System?
3 comments:
The tile is always welcome, but more difficult to install properly (there are many "tiles contractors" out there who do not know what they are). Cans are easier to install fiber type (you 'll probably need unity of several components in a bath) from existing structures, but seem to be a Motel 6 bathroom. There are models out there even more fun if you spend a little more money. here looking for ideas: http://www.lascobathware.com/
Look at me, you have to be replaced, the Executive Board of the party, where the faucet body and shower. First, remove all the tiles in bulk, if the Council was in favor of crumbling old, you must remove a screw on the left side of the other pin on the right side. Next put on board and Hardi Cement Board loops. Use the special screws to install. Install the tile back wall.
The tile is much better than the reading at home, many people prefer to buy a house with a tiled shower after the plastic. The initial cost is more. Tile is my voice
Post a Comment